Environmental Storage Covers Projects
Rubb has provided covers of many types to prevent airborne dust and odor pollution, to prevent algae growth in water supplies and for many other environmental applications.
| Page: | 1 | 2 |
Zhagrus Environmental Concord, Massachusetts Environment Project
Rubb designed, fabricated and installed a custom built 115' wide x 210' long double skinned structure with 20' sidewalls on the sloping site. The building consists of a hot dip galvanized steel frame covered with flame retardant, high tenacity PVC coated polyester fabric. The inner liner was fabricated using a light weight reinforced polyethylene membrane which is to be disposed of at the end of the project. At its highest point, the single span half acre roof is 35 feet high and the whole building is designed to withstand 40 pounds per square foot live roof loads and 90 mph basic wind loads.
View the full Zhagrus Environmental Concord, Massachusetts Environment Project details.
Bechtel Idaho Scoville, Idaho Environment Project
Nuclear waste recycling requires backups for the backups and Rubb backed up Idaho National Labs with 6 interlocking crane liftable facilities (47' x 170). This facility will be in use for the next 15 years providing a safe environment.
View the full Bechtel Idaho Scoville, Idaho Environment Project details.
Toronto Harbour Commission Toronto, Ontario Environment Project
Toronto Harbour Commission leased this building as part of their ?Greening of the Port? project. Contaminated soil is reclaimed fully under cover to prevent airborne contamination migrating from the site. The complex plant is comfortably housed in the structure. After completing the project, building decontamination is easily achieved.
View the full Toronto Harbour Commission Toronto, Ontario Environment Project details.
Uniroyal Chemical Ltd. Elmira, Ontario Environment Project
This structure is used as a cover for odor control.
View the full Uniroyal Chemical Ltd. Elmira, Ontario Environment Project details.
Westinghouse Savannah River Company Aiken, South Carolina Environment Project
This Rubb structure is being used to cover waste containers.
View the full Westinghouse Savannah River Company Aiken, South Carolina Environment Project details.
ANSTO Lucas Heights, NSW Australia Environment Project
When the Australian Nuclear Science and Technology Organization (ANSTO) needed to re-work a portion of their nuclear reactor at the Lucas Heights Nuclear Reactor site near Sydney, they searched for an alternative to conventional construction.
Rubb was contacted through their agents in Australia and designed a structure 39.4' (12m) wide x 89.24' (27.2m) long which would work in the reactor building and then could be used outside in another use and location. The quality of the Rubb structure, its flexibility and Rubb's support during the installation impressed ANSTO. It is the first Rubb structure in Australia.
| Page: | 1 | 2 |
